 |
|
|
| |
|
|
|
|
|
|
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
|
|
| |
|
|
Build Your Online Product Catalogs?
| Product Name: |
ULTRA WHITE CAULK
|
| Supply Ability: |
|
| Related proudcts |
|
| Specifications |
280ml/cartridge |
| Price Term: |
FOB |
| Port of loading: |
QINGDAO |
| Minimum Order |
12000CARTRIDGE |
| Unit Price: |
USD0.65/CARTRIDGE |
|
KTR 700 ULTRA WHITE CAULK
ELASTOMERIC ACRYLIC SEALANT
35-Year Warranty
(ASTM C 834-91)
PRODUCT DESCRIPTION: A one-component, non-staining high-performance with excellent resistance to air and moisture penetration and UV rays that cures into a flexible rubber sand gasket that will not crack, even after many years of outdoor exposure; can be paited over shortly after application with latex or oil paint.
BASIC USES: Suitable for most interior or exterior applications. Seals cracks on concrete, drywall and wood; excellent for caulking around doors and window frames, siding corner joints, skylights, vents, air ducts and chimneys, where joint movement is moderate.
PRODUCT ADVANTAGES:
*Seals cracks in concrete
*100% paintable in two hours
*100% water cleanup
*Mildew and moisture resistant
*100% flexible
*100% exterior / interior
*100% elastomeric
* Non-yellowing white finish
TECHNICAL DATA
Percent Solids: 70.00¡À1% by weight
55.59¡À1% by volume
Colors: Ultra white
Weight / Gallon: 11.65¡À0.5 lbs
Viscosity: 300,000 ¨C 350, 000 cps.
Flash Point: Non-flammable
Drying Time: Tack free: 15 minutes
To coat with latex paint: 2 hours
To coat with alkyd paint: 24 hours
Flash Point: Non-flammable
Size: 10.1-oz. cartridge
Theoretical Coverage: Approximately 34 linear feet of 1/4¡¯¡¯ bead per 10.1-oz. Cartridge.
Surface Preparation:Surface must be free of dust, dirt, grease and mildew. Remove all loose or badly cracked sealant and paint.
Mildewed Surfaces: Any existing mildew on the surface must be completely killed and removed prior to the application of new caulk. Using a long-handled brush, scrub mildewed surface with a mixture of one quart of household bleach and three quarts of warm water. Rinse completely and let dry completely.
Previously Cualked Surfaces: It is critical to remove as much old sealant as possible before applying new caulk, spefially if it is cracked, eroded or pulled away from the joint.
Application Instructions: For best results, follow t |
| Company: |
Kater Ahesives Industrial Co.,Ltd.
|
| Contact: |
Ms. tan yuejuan |
| Address: |
Shunjing Road, Songxia Industrial Park, Songgang, Nanhai District, Foshan, Guangdong, china |
| Postcode: |
528234 |
| Tel: |
0757-85200225 |
| Fax: |
0757-85203428 |
| E-mail: |
|
|
|
Home
