 |
|
|
| |
|
|
|
|
|
|
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
|
|
| |
|
|
Build Your Online Product Catalogs?
| Product Name: |
DUCT SEALANT
|
| Supply Ability: |
|
| Related proudcts |
|
| Specifications |
280ml/cartridge |
| Price Term: |
FOB |
| Port of loading: |
QINGDAO |
| Minimum Order |
12000CARTRIDGE |
| Unit Price: |
USD0.78/CARTRIDGE |
|
ACRYLIC CAULK KTR800
DUCT SEALANT FOR AIR CONDITIONING DUCTS
It is fire-resistive, fibrated, water based, indoor/outdoor vapor barrier duct sealant for low, medium and high velocity heating and air conditioning ducts. It should perform as a tough and flexible adhesive and sealant, forming a durable seal against air leakage when used with or without reinforcing tape or membrane.
Specifications:
&©|8226; COLOR: Light Gray
&©|8226; BASE MATERIAL: Synthetic latex emulsion
&©|8226; CONSISTENCY: Paste
&©|8226; APPLICATION CONSISTENCY: Brush, Trowel, Caulking Gun, or Power Extrusion.
&©|8226; AVERAGE WEIGHT / U.S. GALLON (FSTM 3): 11.6 lbs. (1.35 kg/l)
&©|8226; AVERAGE NON-VOLATILE (FSTM 9A): 55% by volume (69% by weight)
&©|8226; VISCOSITY: soft buttery gel with a typical viscosity range of 130,000 - 160,000 cps.
&©|8226; COVERAGE RANGE (FSTM 72):
1. Brush: 25-50 sq. ft./gal (.6-1.2 m2/l)
2. 0.064 in. (1.6 mm) -0.032 in. (0.8 mm) wet film thickness
3. Caulking Gun: 125 lineal ft. per 10.5 fluid oz. tube, 1/8 in. bead (38 m per .31 l tube, 3.2 mm bead.)
4. 30 lineal ft. per 10.5 fluid oz. rube, 1/4 in. bead (9 m per .31 tube, 6.4 mm bead).
&©|8226; TEMPERATURE RESISTANCE: -30ºC to 110ºC
&©|8226; SERVICE TEMPERATURE LIMITS (FSTM 165): 20ºF to 200ºF (-7ºC to 93ºC)
&©|8226; STORAGE TEMPERATURE: 5ºC to 35ºC
&©|8226; APPLICATION TEMPERATURE: 5ºC to 50ºC
&©|8226; DRYING TIME 73ºF (23ºC) 50% RH (ASTM D 1640):
1. Set to Touch: 1 hour
2. Dry Through: 24 hours
&©|8226; WATER VAPOR PERMEANCE: ASTM D 3278 Procedure A, 0.45 perms (0.30 metric perms) at 35 mils (.9 mm) dry
&©|8226; WET FLAMMABILITY (ASTM D 3278): No flash to boiling, over 210ºF (99ºC)
&©|8226; SURFACE BURNING CHARACTERISTICS (ASTM E 84):
1. Flame Spread: 5
2. Smoke Developed: 0
&©|8226; PRESSURE TESTING: Can be pressure tested within 16 hours dry time above 70ºF (21ºC) and below 60% RH. It should forms a strong bond to galvanized, aluminum or mild steel me |
| Company: |
Kater Ahesives Industrial Co.,Ltd.
|
| Contact: |
Ms. tan yuejuan |
| Address: |
Shunjing Road, Songxia Industrial Park, Songgang, Nanhai District, Foshan, Guangdong, china |
| Postcode: |
528234 |
| Tel: |
0757-85200225 |
| Fax: |
0757-85203428 |
| E-mail: |
|
|
|
Home
